Get call and SMS on your mobile whether anyone entered into closed office / shop / godown etc, also if open the door, drawer, showcese etc.
Specially for jewellery showroom, office, store room etc.
Elegant and advanced touch keypad for easy operation;
2 wired and 50 wireless defense zones; each wireless zone supports maximum 10 sensors;
Support maximum 50 remote controllers;
Built-in artificial intelligent English message;
Can preset 2 phone number, when alarming, system will make audio call to these numbers automatically;
can preset 2 SMS numbers: when alarming, system will send SMS;
Timely arm and disarm;
SOS, fire, gas, door, hall, window, balcony, and boundary places alarm
Real-time,delay,24 hours zones programming function;
Wireless learning code: easy to add additional wireless accessories;
Remote control the device to arm, disarm, monitor, and intercom by phone;
Record checking: the device can store 200 alarm records;
Different arm status: out arm, home arm, delay arm and timely arm;
Arm by different ways: panel keypad, remote controller, remote call;
Alarm call has the priority: even when the number or the device is busy;
Built-in LI battery; automatically recharge;
Technical Parameters :
Input Voltage: DC12V/1A
Standby Current: 40mA
Alarming Current: 450Ma
Wireless Frequency: 433/315MHZ EV1527/PT2262
GSM Frequency: 850/900/1800/1900MHZ
Back-up Battery: Lithium ion rechargeable battery
Siren Volume: 100-110Db
Components List :
Main panel 1pc
Remote controller 2pc
PIR sensor 1pc
Door sensor 1pc
Power adapter 1pc
Reset And Reconfigure Device :
Power off The adaptor of main control panel.
Power off the control panel switch.
Hold SET Button and power on the adaptor.
[Prompt for add remote] press any key of first remote controller.
Press any key of second remote controller.
Press SET key Once to set sensor zone wise.
Ping the sensor.
Press SET key Once to set another sensor on another zone .
Continue it to add upto 50pcs sensor on total zone.
CONFIG SETUP VIA SMS :
888857[mobile no - 2]#
888858[mobile no - 2]#
Operation VIA SMS :
ARM : 12341#
• Need 2 times disarm to stop alarm. Must ARM by send SMS after stop the alarm.
Operation Via Alarm Call :
Press 8 : listen alarm
Press 9 : listen live sound
Press * : Stop listen live sound
Press 2 : Disarm sensor
Press # : Cut the alarm call
Must Need 2 times disarm by sms to stop alarm. Must ARM by send SMS after stop the alarm.